Flir thermal scope

More
10 years 10 months ago #35642 by foxhunter
Flir thermal scope was created by foxhunter
I am looking at a thermal scope for some Texas hog hunting. I am looking at a FLIR brand with the following:
Manufacturer:FLIR
Dimensions:8.0”(L) x 2.9”(W) x 3.3”(H)
Weight:1.8 lbs. (35mm) / 2.4 lbs. (60mm)
Finish:Black, Rubberized
Power:Internal Li-Ion
Battery Life:>4 Hours Continual
Recoil Rating:Up To/Including .30 Caliber (Gas Operated, Semi Automatic Rifle)
Operating Temperature:-4°F to +122°F
Storage Temperature:-40°F to +140°F
Waterproof:IPX7, Submersible 1 Meter for 30 Minutes
Warranty:2-Year Standard / 3-Year with Registration / 10-Year on Thermal Detector
OPTICAL SPECS:—————————————————-
Sensor:Vanadium Oxide, Uncooled Microbolometer
Detector:640 x 480
Sensitivity:<50mK @ f/1.0
Spectral:7.5-13.5 µm
Start-Up:<1.5 sec. from Standby
Lens Focal Length:35mm, 60mm Available
FOV:18° (35mm Lens) / 10° (60mm Lens)
Focus:Fixed (35mm Lenses), Manual (60mm Lens)
Frame Rate:30 Hz
Polarity:White Hot / Black Hot / Instalert / Sepia / Iron / Red
Digital Zoom:1.1 – 9x (35mm) / 2 – 16x (60mm)
Reticles:Duplex, Fine Duplex, German
Video Out:Yes
Included:RS ThermoSight, AC Adapter, USB Cable, Lens Cloth, Rubber Eye Cup, Hard Case, Operator Manual

This one is $6500. The same scope except that the detector is 320 x 240 is $3900.

Can anyone explain what the practical difference is and if it would make any difference in hog hunting?

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #35662 by LebbenB
Replied by LebbenB on topic Flir thermal scope
The practical difference will be in the sensitivity of the detector. Think of the eye piece like a TV or computer monitor. The images in the 320x240 scope will be less defined than the 640x480. To use video games as a reference, it would be like comparing the graphics of Doom to the Graphics of Doom 3.

If you know someone with a thermal scope, I highly recommend you get with him/her and look through the scope before dropping major coin on one.

I was very happy with my dealings with Armasight for my NVGs. They also sell a line of TWS', you might wanna check them out and call or email them about thermals, I'm sure they could give you good info.

Hunting pigs is fun. It's more fun at night, with suppressors and NODs. It's the most fun at night with NODs from a helicopter.
The following user(s) said Thank You: jtallen83

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #35666 by foxhunter
Replied by foxhunter on topic Flir thermal scope
I appreciate the feed back. FYI I am in the wrong generation to know about the difference between Doom and Doom3. never heard of them, but I got the gist of it.

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #35667 by OleCowboy
Replied by OleCowboy on topic Flir thermal scope
Here is a good review of the RS: www.petersenshunting.com/2014/01/13/thermosight-rs-review/

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #35692 by Charlie
Replied by Charlie on topic Flir thermal scope
Everything I have read about FLIR is good, but I have yet to look through one of their devices. When it comes to optics (and pretty much everything else) it pays to demo the product before you buy.

Charlie

Please Log in or Create an account to join the conversation.