M4 Optics mount suggestions

More
15 years 5 months ago #1754 by Zabby
M4 Optics mount suggestions was created by Zabby
Recently aquired a Colt M4. I want to take the carry gadle off and put a scope on the rail. What mount will allow me to keep my front iron sights? Are the front Iron sights easily removable?

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago - 15 years 4 months ago #1759 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:M4 Optics mount suggestions
That would all depend on the sights. If it is an A2 sight-gas-block, depending on the scope and how high it sets up off the rail, most likely no.
As for taking it off, is it a removable sight on a railed gas-block, then yes you can take it off, if it is a A2 front sight gas-block or A frame tower then no, you would have to replace it with a new gas-block.

There is a site that I know of where alot of the guys own Colts and various AR-15s, and they know their stuff, you might check it out.

www.ar-15.com/index.php?r=1280
Last edit: 15 years 4 months ago by BUILDING MY SASS.

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1766 by Edge
Replied by Edge on topic Re:M4 Optics mount suggestions
I would suggest a mount by LaRue.

I would just keep the A2 front sight. It will "fade" away with the use of an optic and if you are going to use a red-dot, then you can set it up to "co-witness" with it and a rear iron sight. This makes a great CQB set up.

I guess you need to ask yourself what do you want to do with the M4? Is it going to be a CQB type weapon or do you want to have some magnification to see out a bit further?

The nice thing about the A3/A4 type upper is that you can swap out all sorts of sights and accessories to suit your mission specific needs. Thus you can have a EOTech/Aimpoint style red-dot for CQB and then swap that off for an ACOG or variable powered optic for longer range shooting.

This image is hidden for guests.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1767 by Edge
Replied by Edge on topic Re:M4 Optics mount suggestions
Link to Larue Poster of M4 options:

www.thefirearmblog.com/blog/2007/10/01/beuatiful-m4-poster/

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1769 by Zabby
Replied by Zabby on topic Re:M4 Optics mount suggestions
Im thinking ill take the carry handle off and put a LaRue mount on the rail. I shoot 0-200 yards, benchrest and otherwise. So, red dot or scope? Combo? Mount ideas? Thanks for the help guys

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1771 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:M4 Optics mount suggestions
Hey Zabby, Ok, how about a Leupold Mark AR scope, I have it on good advice this is a affordable scope and would suit your need for the range that you described. They make two models a 1.5x4x20 or the 3x9x40, www.leupold.com/tactical/products/scopes/ . Now for the LaRue mount, I will need to know what are you going to use for the rear site after you take off the C handle if you are planning to put one on. Give it some thought and let us know....
BMS

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1772 by Zabby
Replied by Zabby on topic Re:M4 Optics mount suggestions
Well, I think I may go with flip up rear sights. Perhaps front as well? I plan to add a free floating quad rail at some point. LaRue of course

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago - 15 years 4 months ago #1773 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:M4 Optics mount suggestions
On the rear sight I would suggest MI's SPLP rear sight, www.midwestindustriesinc.com/index.cfm?f...play&category_id=173

On the scope mount the LaRue LT-104 I think would work well for you. stores.homestead.com/Laruetactical/Detail.bok?no=30


I gather that you have a railed front gas block, I will have to check with MI to see what one would work best, I think it would be the MCTAR-FFG, that would depend if the gas block is the same height as the receiver rail,if it is, it would be the MCTAR-FFR.
BMS
Last edit: 15 years 4 months ago by BUILDING MY SASS.

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1774 by Zabby
Replied by Zabby on topic Re:M4 Optics mount suggestions
It is a Colt Match Target carbine. I live in MA, so it has the non-adjustable "adjustable" stock and other such annoying features to overcome. What do you mean by "railed front gas block"?

Please Log in or Create an account to join the conversation.

More
15 years 4 months ago #1775 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:M4 Optics mount suggestions
If the one I am looking at is the same as yours then you have the A2 front sight post www.coltsmfg.com/products-c6-q9-Colt_Rifles.aspx#

In order to have a flip-up front site, you will have to change your gas block or get one that is an all in one or you will have to go with the FF hand guard and mount the FU sight on that.

The railed front gas block is like the one that comes on the A4 (M-15 armalite)or here is a link to one from MI
www.midwestindustriesinc.com/index.cfm?f...play&category_id=100
or this one.

www.armalite.com/ItemForm.aspx?item=EA11...75-b80c-90f07c3d5b62
Any way I think you should just stay with the A2 sight for now.

Please Log in or Create an account to join the conversation.