Armalite AR10 Newbie

More
10 years 11 months ago #46820 by faawrenchbndr
Replied by faawrenchbndr on topic Armalite AR10 Newbie

jtallen83 wrote: I thought you were referring to his question about the barrel, that seems to be the one thing that stayed the same between A & B models. Short of Noveske I have not seen any ArmaLite pattern barrels for sale, some say AR-10 in the title but when you read the description they are DPMS pattern.
If I understand correctly you could use a DPMS pattern barrel in an Armalite if you use a DPMS bolt with it?This proprietary stuff gets murky for me sometimes??????


Not really sure,.......I had a DPMS that was a piece of shiOt. It was my first .308 pattern AR. DPMS could never get it to feed correctly. They eventually replaced the entire rifle, I sold it and have never given them another dime.

The Noveske barrels are the only ones I have tried. So I really can not answer that question.

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46821 by jtallen83
Replied by jtallen83 on topic Armalite AR10 Newbie
I think this 4 rounder will work in your A model;
www.midwayusa.com/product/833990/dpms-ma...und-steel-parkerized

Here is a 5 rounder, never heard of this place before though;
www.leesmags.com/product-p/14590586.htm

This link has two that may work, the ArmaLite Gen II will not work in your rifle;
gunmagwarehouse.com/all-magazines/rifle-...ty=139&platforms=284

Lancer has 5 rounders, they are about as good a mag as money can buy for these 308AR's but as you can see it takes a chunk of money to try one;
store.lancer-systems.com/product/l7awm-5...aque-black/magazines

I've never heard of a Lancer not working in a rifle that a P-mag worked in but.....
The issue I see is Armalite says in the tech note they tested the A model with P-mags, others MAY work.......P-mags do not come in any size under 10 that I'm aware of.
The following user(s) said Thank You: Osiek, 3or88

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46822 by 3or88
Replied by 3or88 on topic Armalite AR10 Newbie
Aramalite AR10 "A" Supersass

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46827 by 3or88
Replied by 3or88 on topic Armalite AR10 Newbie
Thanks for the links; I just bought a couple and will let you know feedback. Thanks again on all the info.

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago - 10 years 11 months ago #46830 by faawrenchbndr
Replied by faawrenchbndr on topic Armalite AR10 Newbie
There are 5 round limiters for the ten round PMags.........this would be my ONLY choice.

www.magpul.com/products/minus-5-round-li...r-pmag-gen-m3-762x51

I am sure they are available at other places other than MagPul directly.

**** Looks like; MidWay USA, Brownells, Amazon, Cheaper than Dirt, Academy.Com, 44Mag.com......others come up with a google search for "minus 5 round limiter 7.62 mag"
Last edit: 10 years 11 months ago by faawrenchbndr.
The following user(s) said Thank You: 3or88

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46831 by faawrenchbndr
Replied by faawrenchbndr on topic Armalite AR10 Newbie

3or88 wrote: Aramalite AR10 "A" Supersass


For barrel selection;

Rainier Arms would be my pick. Or you could contact ADCO and have your barrel cut, rethreaded and crowned. I believe it would run about $175.

www.rainierarms.com/barrels/308-7-62

www.adcofirearms.com
The following user(s) said Thank You: 3or88

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46838 by Siscowet
Replied by Siscowet on topic Armalite AR10 Newbie
Two things: 1. A Super SASS Armalite barrel is a work of art. It is triple lapped stainless steel, and ceramic coated to provide a low visibility cover for a highly accurate barrel. In going to a 18 inch barrel, you are giving up one of the things that made a Super SASS so expensive in the first place. You get a two inch shorter gun, that you have spent a heck of a lot more money for than you needed to, and have reduced the maximum overall long distance performance by a little bit. You will have a very pricey extra barrel you will have to get rid of, probably for a bit of a loss. Why not sell it and pick up one of the new Armalite models that come in an 18 inch barrel if you want an 18 inch barrel? To mess with a SuperSASS barrel to me doesn't make much sense.
As far as magazines, Brownells or Midway usually have 5 round Magazines to fit the "A" model. For B model five rounders, try CDNN, CTD, or Galati's.
The following user(s) said Thank You: 3or88

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #46840 by faawrenchbndr
Replied by faawrenchbndr on topic Armalite AR10 Newbie

jtallen83 wrote: I thought you were referring to his question about the barrel, that seems to be the one thing that stayed the same between A & B models. Short of Noveske I have not seen any ArmaLite pattern barrels for sale, some say AR-10 in the title but when you read the description they are DPMS pattern.
If I understand correctly you could use a DPMS pattern barrel in an Armalite if you use a DPMS bolt with it?This proprietary stuff gets murky for me sometimes??????


Can not vouch for the validity of all the info, but the link below has a great deal of the same info that I have heard before about compatibility issues. The parts will work together, but often there are MAJOR issues with headspace.

www.ar15.com/forums/t_3_121/685421_ArmaL...rel_extensions_.html

Please Log in or Create an account to join the conversation.