Welcome! Please take a minute to introduce yourself.

Vortex Viper-Mildot Scope-Ar-10

More
12 years 1 week ago #12799 by ernierod
Vortex Viper-Mildot Scope-Ar-10 was created by ernierod
Am considering putting a Vortex Viper/Mildot scope on my 260 Rem/AR-10 rifle.My interests are using various 140g bullets and various suitable powders to achieve minimum grouping.I have a choice of 6.5x20x44mm scope OR a 6.5X20x50mm scope. Any helpful opinions out there??? TNX

Please Log in or Create an account to join the conversation.

More
12 years 1 week ago #12807 by LebbenB
Replied by LebbenB on topic Vortex Viper-Mildot Scope-Ar-10
Vortex makes some really good scopes for the money. 50mm is the most popular of the two, but you can sometimes run into cheekweld issues, depending on the mount/rings you use.

I'd also recommend you look at the MRAD reticle from Vortex as well. It's substenstions allow for more precise adjustments than regular Mil-dots.
The following user(s) said Thank You: jtallen83

Please Log in or Create an account to join the conversation.

More
12 years 1 week ago #12840 by dwco
Replied by dwco on topic Vortex Viper-Mildot Scope-Ar-10
Personally I like the smaller objectives. You can mount them lower for better cheek weld. Unless you are shooting in extreme low light !! Agree with the MRAD.. Give it a look.
The following user(s) said Thank You: jtallen83

Please Log in or Create an account to join the conversation.

More
12 years 1 week ago #12849 by LebbenB
Replied by LebbenB on topic Vortex Viper-Mildot Scope-Ar-10
Vortex refers to it's MRAD reticle as the EBR-1, sorry for not pointing that out earlier.

Please Log in or Create an account to join the conversation.