Parts

  • a Guest
  • Topic Author
  • Visitor
  • Visitor
15 years 6 months ago #1422 by a Guest
Parts was created by a Guest
I've been teaching the armors school and gone for the last week and a half and some here mailed me a question on what parts change from the 15 to the 10. Some how I couldn't track back who it was.
All parts will swap on the lowers from the 15 to the 10 except*********** the bolt stop and the mag catch and push pins.
All parts will swap on the lowers 15 to the DPMS and the Remington ezcept ******** the push pins.MSH

Please Log in or Create an account to join the conversation.

More
15 years 6 months ago #1427 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:Parts
Thank You sir for that information. I couldn't get that straight of an answer from Armalite, I tried, thank you

Please Log in or Create an account to join the conversation.

  • a Guest
  • Topic Author
  • Visitor
  • Visitor
15 years 6 months ago #1429 by a Guest
Replied by a Guest on topic Re:Parts
I'll get to the upper receivers here.
All bolt carrier and barrel extention groups will interchange except Rock River.
Knight, Rem, and DPMS handguards interchange.
Knight,Rem and DPMS gas tubes interchange.
Gas manifolds goes off the barrel dia. .750, .936, .871 ect.
Armalite tried to be the odd man out. Rock River due to magizine design is different.
Armalite has tried to be a pain to all including attitude.mMSH

Please Log in or Create an account to join the conversation.

More
15 years 6 months ago #1431 by BUILDING MY SASS
Replied by BUILDING MY SASS on topic Re:Parts
Thank You again, you have been a great help in questions who's answers have alluded me.
BMS

Please Log in or Create an account to join the conversation.

More
15 years 6 months ago #1439 by RandR
Replied by RandR on topic Re:Parts
Hey Mark! I bought a DPMS lower parts kit, and installed it in my Amralite AR-10 lower. The Mag release SEEMS to function OK. I have not shot it this way, the release button is a little short. Am I missing something? Thanks, Bob.

Please Log in or Create an account to join the conversation.

  • a Guest
  • Topic Author
  • Visitor
  • Visitor
15 years 6 months ago #1441 by a Guest
Replied by a Guest on topic Re:Parts
How do you mean short. Might be a 15 mag catch with a shorter through bolt shank length.
It should extend out from the lower .200 to have something to push on. I'll measure one totay given time.MSH

Please Log in or Create an account to join the conversation.